更多>>聯系我們
| 鎖模力(Clamping Force)：35-2000 TON |
| 射出量(lnjection Capacity)：30-1800g |
| 特性(Main Features)： 直立合模，臥式射出。 Vertical clamping,horizontal injection. 射座高度可調整，鑲件模具可更靈活性設計。 The position of injection unit is freely adjustable. Makes the tooling design more easlier. 可選擇單、雙滑板及圓盤機型，增加產能及安全性。 It is can be equipped with single/doubie skateboarding, disc, etc.,in order to improve operational safety and efficiency. |
規格 Specifcations（可選配高速射出240-1000mm/sec及伺服機）
| 參數(Parameter)\型號(Model) | UNIT | KWT-300T-HR | ||||
 | 射出系統 | 螺桿直徑 Screw Diameter | mm | 60 | 70 | 80 |
| 射出壓力 Iniection Pressure | kg/c㎡ | 1600 | 1500 | 1300 | ||
| 射出量 Max.shot Weight(PS) | g | 500 | 800 | 1200 | ||
| 螺桿行程 Injection Rate | mm | 220 | ||||
| 螺桿轉數 Screw Speed Max | Turn | 0-260 | ||||
| 射嘴行程 Nozzie Retraction | mm | 210 | ||||
| 溫度控制段數 Number of temperature Control | Snt | 4/5 | ||||
 | 鎖模系統 | 鎖模力 Clampinh Force | Tons | 300 | ||
| 模板尺寸 Platen Size | mm | 1300*1100 | ||||
| 模柱間距 Distance Between Tie Bere | mm | 750*550 | ||||
| 最小模厚 Min.Mold Height | mm | 350/400（可根據模厚訂制） | ||||
| 開模行程 Opening Stroke | mm | 300 | ||||
| 最大開模距離 Max.Open daylight | mm | 650/700（訂做機型距離有變化） | ||||
| 頂出壓力 Ejetor Force | Tons | 6 | ||||
 | 動力電熱系統 | 最大液壓壓力 Max.Hydaulic Pressure | kg/c㎡ | 140 | ||
| 泵浦吐出量 Pump Outpet | 1/min | 79(伺服機以實際型號為準） | ||||
| 馬達電力 Pump Motor Power | kw/HP | 22.5/30KW（伺服電機以實際型號為準） | ||||
| 電熱容量 Berrel Heating Power | kw | 12 | ||||
| 總用電量 Total Weight | kw | 36/43 | ||||
 | 其它 | 機器重量 Machine Weight | kg | 15500 | ||
| 機器外型尺寸 Machine Dimensions(L*W*H) | m | 5.5*2.5*3.8 | ||||
規格若有修改，恕不另通知！Specifcations are subject to change without prior notice!
|
中文版
English